Mechanical Design Engineer

Sneha Bearings Private Limited

Khedshivapur, Pune

₹15,000 - ₹20,000 monthly

Fixed

15000 - ₹20000

Earning Potential

20,000

Work from Office

Full Time

Min. 1 Years

Good (Intermediate / Advanced) English

Job Details

Interview Details

Job Highlights

106 applicants

Job Description

Key Duties: 1) Design and optimization of mechanical components for structural bearings. 2) Analysis of mechanical systems, including Finite Element analysis for structural, fatigue, Thermal, vibration, and acoustics. 3) Develops manufacturing drawings in accordance with applicable standard 4) Interfaces with outside vendors for component selection, manufacturing, and assembly. 5) Read and interpret blueprints, technical drawings, schematics, and computer-generated Reports. 6) Confer with system engineers and other personnel to implement operating procedures, 7) Resolve system malfunctions, and provide technical information. 8) Research and analyze customer design proposals, specifications, manuals, and other data 9) Evaluate the feasibility, cost, and maintenance requirements of designs or applications. 10) Design engineer performs intensive research to develop an applied to design new products. 11) Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications. 12) Monitor and ensure the product research and development does not affect the environment 13) Design engineers have to produce periodic reports on the progress of their work. 14) Co- ordination with their departments like Production department, marketing department also falls under the responsibility of a design department. 15) Design the products as per customer specification under Guidance of MD. 16) Prepare G A Drawing & get approval from customer. 17) Prepare component drawings and issue to planning. 18) Design during enquiry stage: a) Design In-Charge shall receive the customer specifications along with enquiry from marketing and verify it with List of Standard Products. If existing in the list, he shall forward the estimation to marketing b) In event the product is non-standard then Marketing In-Charge shall forward the customer’s specifications to Design In-Charge for preparation of preliminary design and budgetary estimation. C) The Design In-Charge shall carry out preliminary design. At-least following design output documents shall be prepared: • Design Analysis • Assembly Drawing / Bill of Materials Relevant requirements specified in Clause 6.3 through 6.7 shall be followed during enquiry stage design. 19) Design and development planning: A) Design In-Charge shall identify and plan the release date of manufacturing drawings based on the manufacturing schedule for a specific Project / Order. Procurement and manufacturing cycle time shall be considered to meet the agreed delivery date. b) Design In-Charge shall review / verify the design output at every identified stage before release. c) Design In-Charge shall plan and confirm the validation process. 20) Design and Development Inputs: a) Design In-Charge shall also consider applicable regulatory and legal requirements in addition to customer’s specified requirement. b) Design In-Charge shall consider the relevant designing work done during enquiry stage for non-standard product along-with clear documentation. c) Design In-Charge shall consider the relevant designing work done for similar product design. 21) Design and development Outputs: a) Design In-Charge shall prepare the following output documents as appropriate. • Design Calculations • Design drawings for statuary / customer’s approval • Manufacturing drawings. b) Design In-Charge shall ensure that the design output documents. • Meet design input requirements • Referred acceptance criteria • Identify critical / crucial design characteristics • Product meets local regulatory requirements including safety aspects. • Design In-Charge shall ensure that output documents are accepted and received from statutory / regulatory body (if required) before it is released to production. • Design In-Charge shall review the documents before its release. 22) Design Verification: a) Design In-charge shall verify the completed design documents. b) The verification may be done in any one or more areas from the following: • Performing alternative calculation manually for the critical stage if CAD is used (one rough print out can be maintained). • Reviewing with the other standard products, which have proved the performance. c) Design In-Charge should maintain a copy of customer’s approval till project completion. 23) Design Validation: a) The design validation of the bearing at the company, shall be successful acceptance of load test. b) Design In-Charge shall ensure the feedback regarding design validation are received c) Any deficiencies or improvements in the design may be considered during next projects. 24) Control of design and development changes: a) Any changes identified in the design shall be received either from customer or internal requirement as deemed necessary. b) On acceptance of the need of changes, all steps from 6.3 to 6.7 shall be repeated and changes shall be incorporated in the design drawing / documents. c) Design In-Charge shall review and change design documents 25) Design Documentation: a) In general, design documents shall comply with requirements of PRO 4.2.3 for approval issuance. b) Design In-Charge shall be responsible to maintain a list of current revision of applicable design documents along with a distribution list. c) The end users of design documents shall use design document in a professional way to avoid damage or deterioration to the design documents. The users shall ensure that obsolete documents are legibly identified or destroyed to avoid un-intended use. d) Specifying revision, the details shall be mentioned in revision status.

More about this Mechanical Design Engineer job

Sneha Bearings Private Limited is aggressively hiring for the job profile of Mechanical Design Engineer at Pune in Khedshivapur locality. Kindly go through the FAQs below to get all answers related to the given job. 1. How much salary can I expect? Ans. You can expect a minimum salary of 15,000 INR and can go up to 20,000 INR. The salary offered will depend on your skills, experience and performance in the interview. 2. What is the eligibility criteria to apply for this job? Ans. The candidate should have completed Graduate degree and people who have 1 to 31 years are eligible to apply for this job. You can apply for more jobs in Pune to get hired quickly. 3. Is there any specific skill required for this job? Ans. The candidate should have Good (Intermediate / Advanced) English skills and sound communication skills for this job. 4. What are the timings of the job and how many working days are there? Ans. It is a Full Time job having timing from 9.00 AM to 6.00PM and will have 6 working days i.e., Monday to Saturday. 5. Is it a work from home job? Ans. No, it’s not a work from home job and can’t be done online. You can explore and apply for other work from home jobs in Pune at apna. 6. Are there any charges or deposits required while applying for the role or while joining? Ans. No work-related deposit needs to be made during your employment with the company. 7. How can I apply for this job? Ans. Go to the apna app and apply for this job. Click on the apply button and call HR directly to schedule your interview. 8. What is the last date to apply? Ans. The last date to apply for this job is 11-Sep-2021. For more details, download apna app and find Full Time jobs in Pune. Through apna, you can find jobs in 74 cities across India. Join NOW!

Job Requirements

Experience

Min. 1 Years

Education

Graduate

English Level

Good (Intermediate / Advanced) English

Job Role

Department

Production / Manufacturing / Engineering

Employment Type

Full Time

Role / Category

Manufacturing - Engineering

Shift

Day Shift

Interview & address details

Work Location

Sneha Bearings, At - Rajapur, Bhor, Pune Khedshivapur, Pune

Interview mode

Online/Telephonic

Job posted by Sneha Bearings Private Limited

Similar jobs

Mechanical Engineer

Mechanical Design Engineer

Pranaav Enterprises

Bhosari, Pimpri-Chinchwad

₹10,000 - ₹14,000 monthly*

Work from Office

Full Time

Min. 1 Years

Basic English

Maintenance Engineer

Only K Group

Kasba Peth, Pune

₹20,000 - ₹30,000 monthly

Field Job

Full Time

Freshers can apply

Basic English

Mechanical Draftsman

Shree Ganesh Engineering

Haveli

₹10,000 - ₹20,000 monthly

Work from Office

Full Time

Freshers can apply

Basic English

Calibration Engineer

M-Tech Enterprises

Bhosari, Pimpri-Chinchwad

₹14,000 - ₹16,000 monthly

Work from Office

Full Time

Freshers can apply

No English Required

Mechanical Design Engineer

Design Studio

Kasba Peth, Pune

₹12,000 - ₹15,000 monthly

Work from Office

Full Time

Freshers only

No English Required

HVAC Site Engineer

Fusion Hvac Solutions Pvt. Ltd

Baner, Pune

₹12,000 - ₹17,000 monthly

Field Job

Full Time

Min. 1 Years

Basic English

Trusted by top companies

Bajaj Allianz Life I...

64 Jobs

Zomato

60 Jobs

Sushco Unicorn

24 Jobs

Krishna Enterprise

13 Jobs

This job has expired

Follow us on social media


© 2024 Apna | All rights reserved Privacy Policy Terms & Conditions