Lead PE AC PEBB
Larsen & Toubro LtdJob Description
Lead PE AC PEBB
Power Electronics Design Engineer
Position
(Experience) | Lead PE AC PEBB 10–15+ years in power electronics product development ,experience in grid-connected product taken to certification. |
Department | R&D – Power Electronics |
Qualification | B.E./B. Tech or M. Tech in Electrical, Electronics or Power Electronics |
Location | Coimbatore |
Reports to | Lead / Head – Power Electronics R&D |
Role Summary
Power electronics engineer having hands on experience on High Power Converters, Exposure to grid-connected Power Conversion System (PCS, Bidirectional AC to DC) for BESS and solar applications.
Product development experience from architecture through prototype, validation and certification support.
Required Skills
- Hands-on design of 3-phase grid-connected converters (PCS, inverters, active front ends) above 50 kW.
- Strong knowledge of gate-drive design, SiC/IGBT switching behaviour, and dead-time, EMI and layout trade-offs.
- Experience with grid-interface hardware: LCL filters, contactors, breakers, pre-charge, surge and EMI filters.
- Preferred proficiency in Altium/OrCAD/Allegro and in simulation tools.
- Good understanding of safety, isolation, creepage and clearance, and thermal design.
Leadership
- Lead, mentor and review the work of a team of HW/ME-control engineers; plan schedules, estimates and resources.
- Work with Software, mechanical, testing, manufacturing and supply chain teams, and with customers on technical queries.
- Own technical documentation: design specifications, test plans, release notes and user manuals.
Key Responsibilities
- Own design & Development from Requirement to production release for Power conversion system
- Define Power Conversion System architecture like 3-phase two-level or three-level topology, DC link, LCL filter and DC/AC interface to the battery or PV side.
- Select and design power stages using SiC/IGBT modules: loss and thermal analysis, busbar and layout design, snubber and DC-link capacitor selection.
- Design the LCL filter, magnetics, and pre-charge and contactor circuits.
- Design the control card and interface boards: DSP/MCU control card, isolated gate-driver boards with desaturation and short-circuit protection and active Miller clamp.
- Design the sensing chain: grid and DC voltage sensing, Hall/shunt current sensing, isolated ADC paths and temperature sensing.
- Design auxiliary power supplies, fan and cooling control, and the interlock and emergency-stop (E-stop) chain.
- Build protection hardware: over-current, over-voltage, ground fault, insulation monitoring and anti-islanding hardware support.
- Perform schematic capture, multilayer PCB layout guidance
- Simulation tools à LTspice, PLECS, PSIM or MATLAB/Simulink).
- Execute DFMEA, reliability and derating analysis, and design reviews.
- Lead bring-up and validation: Grid-simulator testing, regenerative load tests, efficiency and THD measurement, thermal and EMI/EMC pre-compliance.
- Support type testing and certification against IEC 62477-1, IEC 62109, IEC 61000 series, IEC 62116 and applicable grid codes (CEA India, IEEE 1547, UL 1741, VDE-AR-N 4105/4110).
- Coordinate with mechanical, firmware and vendor teams; prepare BOMs and production documentation.
Preferred
- Experience with 1000/1500 V DC systems, BESS or MW-scale PCS.
- Knowledge of 3-level (NPC/T-type) topologies and parallel module operation.
Job role
Job requirements
About company
Similar jobs you can apply for
Power Supply and DistributionElectrical Design Engineer
Larsen & Toubro LtdTesting Engineer
Larsen & Toubro LtdSenior Test Engineer
Larsen & Toubro Ltd
Performance Test Engineer
Blue Yonder Pvt Ltd
Installation Engineer
KONE Elevator IndiaElectrical Maintenance Engineer
Ingersoll-Rand India LtdYou can expect a minimum salary of 0 INR. The salary offered will depend on your skills, experience and performance in the interview.
The candidate should have completed the required education and people who have 10 to 15 years are eligible to apply for this job. You can apply for more jobs in Coimbatore to get hired quickly.
The candidate should have sound communication skills and sound communication skills for this job.
Both Male and Female candidates can apply for this job.
No, it's not a work from home job and can't be done online. You can explore and apply for other work from home jobs in Coimbatore at apna.
No work-related deposit needs to be made during your employment with the company.
Go to the apna app and apply for this job. Click on the apply button and call HR directly to schedule your interview.
The last date to apply for this job is . For more details, download apna app and find Full Time jobs in Coimbatore . Through apna, you can find jobs in 64 cities across India. Join NOW!