Project Engineer
Techexpert EngineeringFixed
₹20,000 - ₹60,000
Earning Potential
₹60,000
Fixed
₹20,000 - ₹60,000
Earning Potential
₹60,000
Job highlights
Urgently hiring
29 applicants
Benefits include: PF, Petrol Allowance, Laptop, Health Insurance, ESI (ESIC)
Job Description
2. Job Purpose
The Projects Engineer (Installation & Commissioning) will be responsible for planning, coordinating and executing installation, erection, testing and commissioning of industrial equipment and painting/coating systems at customer sites.
The role requires strong hands-on experience in mechanical installation, fabrication, ducting, piping, structural erection, electrical coordination, equipment alignment, trial runs and commissioning.
The candidate will be responsible for ensuring that projects are completed safely, on time, within approved scope and as per technical and customer requirements.
3. Key Responsibilities
A. Project Installation & Erection
- Plan and execute installation and erection activities at customer sites.
- Supervise installation of:
- Paint Booths,Powder Coating Systems,Industrial Ovens,Shot Blasting Systems
- Pretreatment Systems,Conveyor Systems,Painting Plants,Drying/Curing Ovens
- Scrubber and exhaust systems,Ducting systems,Tanks and piping,Platforms and structural systems
- Ensure equipment installation is carried out according to approved drawings and project specifications.
- Supervise mechanical erection, structural assembly, equipment positioning and alignment.
- Ensure proper installation of fabricated components and bought-out equipment.
B. Project Planning & Execution
- Prepare site installation plans, schedules and manpower requirements.
- Coordinate with Project Manager / DGM regarding project execution.
- Plan manpower, tools, tackles, lifting equipment and consumables required at site.
- Monitor project progress against planned schedules.
- Identify delays and bottlenecks and take corrective action.
- Ensure timely completion of installation and commissioning activities.
C. Customer Site Coordination
- Act as the primary site-level technical coordination point with customers.
- Coordinate with customer representatives for:
Site readiness,Civil foundations,Electrical supply,Utility connections,Compressed air
Water supply,Gas/fuel supply,Exhaust arrangements,Crane/forklift arrangements
- Conduct site surveys where required.,Communicate project requirements clearly to the customer.
- Maintain professional relationships with customer site teams.
D. Mechanical Installation
- Supervise mechanical installation and assembly activities.
- Check equipment positioning, level, alignment and orientation.
- Ensure proper installation of:
Fans,Motors,Pumps,Conveyors,Burners,Ducting,Dampers,Tanks
Piping,Platforms,Structural supports,Verify tightening, fastening, coupling and alignment of mechanical components.,Ensure installation is carried out according to approved GA and assembly drawings.
E. Electrical & Automation Coordination
- Coordinate with Electrical & Automation teams for installation and commissioning.
- Coordinate installation of:
- Control panels,Motors,Sensors,Limit switches,Temperature controllers
- VFDs,Control wiring,Safety interlocks
- Support electrical testing and commissioning activities.
- Coordinate PLC/HMI testing and functional trials.
- Ensure proper integration between mechanical, electrical and automation systems.
F. Testing & Commissioning
- Prepare commissioning checklists and testing schedules.
- Conduct pre-commissioning inspection.
- Ensure all mechanical, electrical and utility connections are completed before trials.
- Conduct dry runs and trial runs.
- Verify equipment performance against approved technical specifications.
- Check:
- Equipment operation,Airflow,Temperature,Pressure,Conveyor movement,Burner operation
- Exhaust system,Safety interlocks,Emergency stop systems,Control systems
- Identify commissioning problems and coordinate corrective action.
- Complete successful commissioning and obtain customer acceptance/sign-off.
G. Painting & Coating System Commissioning
The candidate should have practical understanding of commissioning activities related to:
- Paint Booths,Powder Coating Plants,Industrial Ovens,Pretreatment Plants,Shot Blasting Systems
- Conveyor Systems,Spray Painting Systems,Exhaust and ventilation systems,Heating systems,Drying and curing systems
The candidate shall verify operating parameters and ensure the system delivers the required process performance.
H. Site Manpower Management
- Supervise technicians, fitters, welders, electricians and subcontractor manpower.
- Allocate daily work activities.
- Monitor manpower productivity.
- Ensure proper discipline and attendance at site.
- Train and guide site technicians wherever required.
- Coordinate with subcontractors and vendors.
I. Material & Tools Management
- Verify materials received at site against dispatch documents.
- Ensure proper storage and handling of equipment and materials.
- Maintain site material records.
- Identify shortages, damages or mismatches and report immediately.
- Control project tools, tackles and equipment.
- Ensure safe handling of materials during erection.
J. Quality Control
- Ensure installation is carried out as per approved drawings and quality standards.
- Coordinate with Quality Department for inspection.
- Identify installation defects and ensure rectification.
- Maintain installation and commissioning inspection records.
- Ensure proper alignment, welding, bolting, sealing and finishing.
- Coordinate customer inspections and quality observations.
K. Safety / HSE
- Ensure strict compliance with company HSE requirements at customer sites.
- Conduct/participate in toolbox meetings and safety briefings.
- Ensure use of appropriate PPE.
- Ensure safe working practices during:
Working at height,Welding and cutting,Lifting operations,Electrical work
Confined-space activities,Hot work,Equipment testing
- Report unsafe conditions, incidents and near misses.
- Ensure compliance with customer safety procedures.
L. Project Documentation
Prepare and maintain:
- Installation Reports,Daily Progress Reports,Site Visit Reports,Manpower Reports,Material Shortage Reports,Site Measurement Reports,Commissioning Checklists,Testing Reports,Punch Point Lists
- Customer Inspection Reports,Handover Documents,As-Built Information,Site Completion Reports
Ensure all project documentation is submitted on time.
4. Project Completion & Handover
- Prepare punch-point lists during commissioning.
- Coordinate closure of customer observations.
- Ensure all pending installation/commissioning activities are completed.
- Obtain customer acceptance/sign-off.
- Prepare final project completion report.
- Coordinate with Service & Maintenance Department for handover.
- Ensure proper handover of system operating information and technical documents.
- Support customer training on operation and basic maintenance of equipment.
5. Service & Maintenance Support
- Provide technical support during warranty and post-commissioning activities.
- Attend customer complaints related to installation and equipment performance.
- Coordinate breakdown/service visits where required.
- Identify root causes of equipment failures.
- Recommend corrective measures.
- Coordinate with Design, Production and Service departments for permanent solutions.
- Support preventive maintenance and system performance improvement activities.
6. Coordination With Internal Departments
The Assistant Manager – Projects will closely coordinate with:
- Design & Engineering,Production,Quality,Purchase,Stores,Electrical & Automation,Sales & Proposal
- Service & Maintenance,Accounts,HR & Administration,Ensure smooth transfer of project information from order stage through installation, commissioning and final handover.
7. Technical Skills Required
The candidate should have good practical knowledge of:
- Mechanical erection and installation,Industrial equipment installation,Heavy fabrication,Sheet metal fabrication,Structural erection,Piping and ducting,Equipment alignment,Welding and fabrication
- Conveyor installation,Fans and blowers,Pumps,Burners and heating systems,Industrial ovens,Paint booths
- Powder coating systems,Shot blasting systems,Pretreatment systems,Exhaust systems,Electrical coordination,PLC/HMI basic understanding,Testing and commissioning,Reading GA and fabrication drawings,AutoCAD drawing interpretation,Measurement and alignment techniques,Project scheduling and site management.
8. Preferred Industry Experience
Preference will be given to candidates having experience in:
- Painting & Coating Equipment
- Paint Booth Manufacturing
- Powder Coating Plants
- Industrial Ovens
- Shot Blasting Systems
- Pretreatment Plants
- Industrial Automation Equipment
- Material Handling Systems
- Heavy Engineering Equipment
- Sheet Metal & Heavy Fabrication
- Industrial Plant Installation
- Mechanical Erection & Commissioning
Experience in the same or similar industry will be strongly preferred.
9. Educational Qualification
Essential
- Diploma / B.E. / B.Tech. in Mechanical Engineering.
- 5–10 years of relevant experience in project installation, erection and commissioning.
Preferred
- Experience in industrial equipment installation and commissioning.
- Knowledge of project management and site execution.
- Knowledge of electrical/automation systems will be an advantage.
- Knowledge of safety requirements for industrial project sites.
10. Behavioral Competencies
- Strong leadership and team-management skills.Good communication and customer-handling skills.
- Strong problem-solving ability.Ability to work independently at customer sites.
- Good planning and coordination skills.Ability to work under project deadlines.
- Strong technical troubleshooting ability.Good reporting and documentation skills.
- Willingness to travel extensively.Ability to manage multiple site activities simultaneously.
11. Key Performance Indicators (KPIs)
Performance will be evaluated based on:
- On-time completion of installation activities,On-time project commissioning.Project execution within approved scope.Reduction in installation rework.Customer satisfaction.Timely closure of punch points.
- Effective manpower utilization.Site material and tool management.Quality of installation and commissioning.Safety compliance and zero major safety incidents.Timely submission of project reports.
- Successful customer handover and acceptance.Reduction in post-commissioning complaints.
- Effective coordination with internal departments.
Job role
Job requirements
About company
Similar jobs you can apply for
Manufacturing / ProductionOperator
Om Engineers & Packing Systems Private Limited
Quality Control Supervisor
Catalydd Engineering And Consulting Services LlpMachine Operator
Mahalaxmi EnterprisesQA/QC Engineer
Dcc Concrete ConsltantMachine Operator
Jhurbi Chuck Jaws Private LimitedProject Manager
Techexpert EngineeringYou can expect a minimum salary of 20,000 INR and can go up to 60,000 INR. The salary offered will depend on your skills, experience and performance in the interview.
The candidate should have completed Diploma degree and people who have 0 to 31 years are eligible to apply for this job. You can apply for more jobs in Pune to get hired quickly.
The candidate should have Good (Intermediate / Advanced) English skills and sound communication skills for this job.
Only Male candidates can apply for this job.
No, it's not a work from home job and can't be done online. You can explore and apply for other work from home jobs in Pune at apna.
No work-related deposit needs to be made during your employment with the company.
Go to the apna app and apply for this job. Click on the apply button and call HR directly to schedule your interview.
The last date to apply for this job is 4 Dec 2026. For more details, download apna app and find Full Time jobs in Pune . Through apna, you can find jobs in 64 cities across India. Join NOW!